Sandy, UT Mold Damage Remediation
If your home or business in Sandy, UT, suffers from a mold infestation, you can trust our SERVPRO of West Jordan crew to take care of your mold damage remediation needs from start to finish. Not only is our crew highly trained and experienced, but we also use highly advanced technology and equipment to properly, efficiently, and safely remediate your mold damage and make it seem "Like it never even happened."
If your home or business has mold damage, don't hesitate and call SERVPRO of West Jordan for your mold remediation needs today. We service Sandy, UT, and surrounding areas!
SERVPRO of West Jordan / South Jordan / North Draper and SERVPRO of Holladay / Cottonwood and SERVPRO of Murray / Midvale / Cottonwood Heights
- 24-Hour Emergency Service
- Faster to Any Size Disaster
- Highly Trained Mold Remediation Technicians
- Specialized Mold Remediation Equipment
- A Trusted Leader in the Restoration Industry
- Locally Owned and Operated
If You See Signs of Mold, Call Us Today – (801) 282-6366
Some restoration companies advertise “mold removal” and may even guarantee to remove all mold. This is a fallacy because it’s impossible to remove all mold from a house or business; microscopic mold spores exist almost everywhere, both indoors and outdoors. Here are the facts:
- Mold is present almost everywhere, indoors and outdoors.
- Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
- Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins.
- Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
- Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
- Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.
Faster to Any Size Fire Disaster
A minor mold problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mold damage, limits additional damage, and reduces the remediation cost.
Locally Owned, with National Resources
We are proud to be an active member of this community. SERVPRO of West Jordan / South Jordan / North Draper and SERVPRO of Holladay / Cottonwood and SERVPRO of Murray / Midvale / Cottonwood Heights is locally owned and operated, so we’re already nearby and ready to help Sandy residents and business owners with any size mold contamination.
We are proud to serve our local communities:
- West Jordan, UT
- Sandy, UT
- South Jordan, UT
- Murray, UT
- Draper, UT
- Herriman, UT
- Riverton, UT
- Cottonwood Heights, UT
- Midvale, UT
- Holladay, UT
- South Salt Lake, UT
- Daybreak, UT
- Bluffdale, UT
- Cottonwood, UT
- Millcreek, UT
Highly Trained Water and Mold Restoration Specialists
As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mold training and certificates.
The Mold Remediation Process
Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:
Step 1: Emergency Contact - (801) 282-6366
We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.
Step 2: Inspection and Mold Damage Assessment
We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.
Step 3: Mold Containment
Our professionals use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.
Step 4: Air Filtration
Our specialized filtration equipment allows our professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process.
Step 5: Removing Mold and Mold-Infested Materials
Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.
Step 6: Cleaning Contents and Sanitizing
SERVPRO of West Jordan / South Jordan / North Draper and SERVPRO of Holladay / Cottonwood and SERVPRO of Murray / Midvale / Cottonwood Heights will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mold infestations also cause a persistent musty odor, our professionals are also trained to remove odors and provide deodorization using fogging equipment.
Step 7: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.
SERVPRO knows Mold
SERVPRO of West Jordan / South Jordan / North Draper and SERVPRO of Holladay / Cottonwood and SERVPRO of Murray / Midvale / Cottonwood Heights has the expertise to make any mold problem a memory in Sandy, UT. We have seen the distress homeowners experience upon finding mold at their property. SERVPRO can help calm any mold concerns. Our trained professionals have the equipment and knowledge it takes to properly remediate mold. Call (801) 282-6366 - We are ready and waiting to respond to your emergency.